The Pedrollo VXCm 15/45-N submersible pump is designed to deliver reliable performance in demanding wastewater and sewage applications. Part of Pedrollo’s renowned VXC series, this model is equipped with a vortex-type impeller that allows solids to pass through freely without direct contact with the impeller, significantly reducing the risk of clogging. This design makes the pump particularly suitable for dirty water containing suspended solids, fibrous materials, and sewage mixtures commonly found in domestic and civil installations.

• Brand: Pedrollo

• Model: VXCm 15/45-N

• Origin: Italy

• Power (P2): 1.1 kW (1.5 HP)

• Max Head: 11.5 m

• Max Flow: 650 l/min (39 m³/h)

• Suction Size: Submersible (bottom inlet)

• Discharge Size: DN50 (2″)

• Applications: Sewage, wastewater, dirty water with suspended solids, civil and domestic drainage

• Build Material: Heavy-duty cast iron construction with vortex impeller

<p>The post Pedrollo VXCm 15/45-N Submersible Sewage Pump first appeared on BINJA.</p>

For reliable operation in demanding industrial and commercial wastewater environments. Designed for continuous-duty applications, the DR-300TS combines high flow capacity, strong lifting performance, and excellent resistance to clogging.

Brand: VESPA
Model: DR-300TS
Origin: Italy
Power (P2): 2.2 kW (3 HP)
Input Power (P1): 380–400 V / 50 Hz, Three Phase
Max Head: 19.8 m
Max Flow: 470 l/min

Suction Size: Bottom suction (submersible intake)
Discharge Size: 50 mm
Applications: Sewage transfer, drainage pits, basements, sumps, industrial wastewater, agricultural drainage
Build Material:

• Pump body: Cast iron with cataphoresis coating

• Motor cover: Stainless steel

• Impeller: Stainless steel open impeller

• Grinder: Treated steel

• Motor shaft: Stainless steel AISI 430

<p>The post VESPA DR-300TS 3HP Submersible Pump first appeared on BINJA.</p>

Engineered in Italy for reliable operation in demanding sewage and drainage environments. Designed to combine high flow rate with strong lifting capability, the DR-300S is ideal for installations where large volumes of wastewater must be transferred efficiently while maintaining resistance to clogging.

Brand: VESPA
Model: DR-300S
Origin: Italy
Power (P2): 2.2 kW (3 HP)
Input Power (P1): 220–230 V / 50 Hz, Single Phase
Max Head: 19.8 m
Max Flow: 470 l/miN

Discharge Size: 50 mm
Applications: Sewage transfer, drainage pits, basements, sumps, industrial wastewater, agricultural drainage
Build Material:

• Pump body: Cast iron with cataphoresis coating
• Motor cover: Stainless steel
• Impeller: Stainless steel open impeller
• Grinder: Treated steel
• Motor shaft: Stainless steel AISI 430

<p>The post VESPA DR-300S 3HP Submersible Pump first appeared on BINJA.</p>

Engineered in Italy to provide reliable and continuous operation in challenging wastewater environments. Designed for higher flow and head requirements than smaller DR-S models, the DR-200S is well suited for applications where increased pumping capacity and resistance to clogging are essential.

Brand: VESPA
Model: DR-200S
Origin: Italy
Power (P2): 1.5 kW (2 HP)
Input Power (P1): 220–230 V / 50 Hz
Max Head: 18 m
Max Flow: 385 l/min

Suction Size: Bottom suction (submersible intake)
Discharge Size: 50 mm
Applications: Sewage transfer, drainage pits, basements, sumps, industrial wastewater, agricultural drainage
Build Material:

• Pump body: Cast iron with cataphoresis coating

• Motor cover: Stainless steel

• Impeller: Stainless steel open impeller

• Grinder: Treated steel

• Motor shaft: Stainless steel AISI 430

<p>The post VESPA 2HP DR-200S Submersible Sewage Pump first appeared on BINJA.</p>

High performance in sewage and drainage applications where fibrous or contaminated wastewater must be handled efficiently. Designed with a compact yet robust construction, the DR-150S strikes a balance between lifting capability and flow rate, making it suitable for a wide range of residential, commercial, agricultural, and light industrial applications.

Brand: VESPA
Model: DR-150S
Origin: Italy
Power (P2): 1.1 kW (1.5 HP)
Input Power (P1): 220–230 V / 50 Hz, Single Phase
Max Head: 16 m
Max Flow:275 l/min

Suction Size: Bottom suction (submersible intake)
Discharge Size: 50 mm
Applications: Sewage and drainage systems, basements, sumps, industrial wastewater, agricultural drainage
Build Material:

• Pump body: Cast iron (cataphoresis coated)

• Motor cover: Stainless steel

• Impeller: Stainless steel open impeller

• Grinder: Treated steel

• Motor shaft: Stainless steel AISI 430

<p>The post VESPA 1.5HP DR-150S Submersible Sewage Pump first appeared on BINJA.</p>

Brand: VESPA
Model: DR-100S
Origin: Italy
Power (P2): 0.75 kW (1 HP)
Input Power (P1):

• Single-phase: 220–230 V / 50 Hz

Max Head: 14 m
Max Flow: 250 l/min (≈ 15 m³/h)
Suction Size: Bottom suction (submersible intake)
Discharge Size: 50 mm outlet
Applications: Sewage and drainage systems, industrial wastewater, basements, sumps, agricultural drainage
Build Material:

• Pump body: Cast iron

• Motor cover: Stainless steel

• Impeller: Stainless steel (open impeller)

• Motor shaft: Stainless steel AISI 430

<p>The post VESPA 1HP DR-100S Submersible Sewage Pump first appeared on BINJA.</p>

• Model: TWP87506
• Brand: TOTAL
• Pump Type: Sewage / Dirty Water Submersible Pump
• Power Output: 750 W (1.0 HP)
• Power Supply: 220–240 V, 50 Hz
• Motor Type: Copper wire motor
• Maximum Flow Rate: 217 litres per minute
• Maximum Head: 8 metres
• Maximum Submersion Depth: 7 metres
• Discharge Outlet Size: 1 inch
• Control Method: Automatic operation with float switch
• Cable Length: 9 metres
• Application Type: Dirty water and sewage pumping
• Installation: Fully submersible
• Operating Mode: Automatic ON/OFF via float switch
• Suitable Fluids: Wastewater, sewage, dirty water
• Typical Use: Residential, light commercial, drainage applications

<p>The post Total TWP87506 Sewage Submersible Pump 1.0 HP first appeared on BINJA.</p>

Powerful 750 W (1.0 HP) motor for efficient sewage & dirty water removal.  Pumps up to 350 L/min — suitable for demanding drainage needs. 13 m maximum head allows vertical pumping in deep installations. 2″ pipe diameter for standard connection and versatility.  Copper wire motor for better thermal performance and durability.  Durable stainless steel pump body resists corrosion. Cast iron motor body for rugged structural strength. Comes with a 9 m power cable ready for submersible use.

• Model: TWP775016
• Product Type: Sewage Submersible Pump
• Voltage: 220–240 V ~ 50 Hz
• Power: 750 W (1.0 HP)
• Maximum Head: 13 m
• Maximum Flow Rate: 350 L/min
• Pipe Diameter: 2 inches
• Motor Type: Copper wire motor
• Pump Body Material: Stainless steel
• Motor Body Material: Cast iron
• Cable Length: 9 m
• Application: Dirty water and sewage removal

<p>The post Total Submersible Sewage Water Pump TWP775016 first appeared on BINJA.</p>

Pedrollo’s renowned range of multistage submersible pumps is built for reliable transfer of clean water in domestic and civil applications. Its high efficiency and durable design make it an outstanding choice for users who need consistent water pressure, quiet operation, and long service life. The pump is specifically engineered for situations where water needs to be lifted from tanks, reservoirs, or wells, ensuring optimal performance under submerged operation.

• Brand: Pedrollo
• Model: TOP MULTI 2
• Origin: Italy
• Power (P2): 0.55 kW / 0.75 HP
• Max Head: 40 m
• Max Flow: 7.2 m³/h
• Suction Size: Ø 35 mm hose connector (included)
• Discharge Size: Ø 35 mm outlet with sleeve and clapet valve
• Applications: Domestic water supply, irrigation, tank emptying, rainwater collection, and well water transfer
• Build Material: Stainless steel body with technopolymer components and NBR seals

<p>The post Pedrollo TOP MULTI 2 Submersible Pump For Clean Water first appeared on BINJA.</p>

Compact, high-quality submersible drainage pump built entirely in stainless steel for long-lasting durability and corrosion resistance. Designed for reliability and ease of use, this model is part of the renowned Grundfos UNILIFT KP series — trusted worldwide for handling drainage, stormwater, and wastewater with minimal maintenance. It is equipped with an integrated float switch for automatic start and stop operation, making it suitable for unattended installations in sumps, tanks, or flooded areas.

•  Brand: Grundfos
• Model: UNILIFT KP.250.A.1
• Origin: Hungary (HU)
• Power (P2): 0.25 kW
• Input Power (P1): 480 W
• Max Head: 7.5 m
• Max Flow: 11.2 m³/h
• Suction Size: 1 ¼ inch (Rp 1 ¼)
• Discharge Size: 1 ¼ inch (Rp 1 ¼)
• Applications: Drainage, dewatering, rainwater pumping, surface and groundwater transfer
• Build Material: Stainless steel EN 1.4301 / AISI 304 (pump housing and impeller)

<p>The post Grundfos UNILIFT KP.250.A.1 Submersible Drainage Pump first appeared on BINJA.</p>