The SFA Sanipuddle Condensate Pump is a practical and reliable solution for managing condensate water produced by air conditioning systems, dehumidifiers, and refrigeration equipment. Designed for situations where gravity drainage cannot be achieved, the Sanipuddle offers automatic condensate removal with minimal installation effort.

• Brand: SFA

• Model: Sanipuddle

• Product Type: Condensate Removal Pump

• Application Type: Condensate water pumping

• Typical Sources:

  • Air conditioning units

  • Dehumidifiers

  • Refrigeration equipment

• Installation Type: Floor-mounted (placed directly on the floor)

• Operation: Automatic condensate detection and pumping

• Discharge Method: Pumped through small-diameter tubing

• Water Type: Condensate (clean water)

• Design: Compact, low-profile housing

• Control: Automatic start/stop based on water level

• Intended Use: Residential and light commercial

• Typical Locations:

  • Under air-conditioning units

  • Mechanical rooms

  • Utility areas

  • Retail and office HVAC installations

<p>The post SFA Sanipuddle Condensate Pump first appeared on BINJA.</p>

• Model: TWP87506
• Brand: TOTAL
• Pump Type: Sewage / Dirty Water Submersible Pump
• Power Output: 750 W (1.0 HP)
• Power Supply: 220–240 V, 50 Hz
• Motor Type: Copper wire motor
• Maximum Flow Rate: 217 litres per minute
• Maximum Head: 8 metres
• Maximum Submersion Depth: 7 metres
• Discharge Outlet Size: 1 inch
• Control Method: Automatic operation with float switch
• Cable Length: 9 metres
• Application Type: Dirty water and sewage pumping
• Installation: Fully submersible
• Operating Mode: Automatic ON/OFF via float switch
• Suitable Fluids: Wastewater, sewage, dirty water
• Typical Use: Residential, light commercial, drainage applications

<p>The post Total TWP87506 Sewage Submersible Pump 1.0 HP first appeared on BINJA.</p>

Powerful 750 W (1.0 HP) motor for efficient sewage & dirty water removal.  Pumps up to 350 L/min — suitable for demanding drainage needs. 13 m maximum head allows vertical pumping in deep installations. 2″ pipe diameter for standard connection and versatility.  Copper wire motor for better thermal performance and durability.  Durable stainless steel pump body resists corrosion. Cast iron motor body for rugged structural strength. Comes with a 9 m power cable ready for submersible use.

• Model: TWP775016
• Product Type: Sewage Submersible Pump
• Voltage: 220–240 V ~ 50 Hz
• Power: 750 W (1.0 HP)
• Maximum Head: 13 m
• Maximum Flow Rate: 350 L/min
• Pipe Diameter: 2 inches
• Motor Type: Copper wire motor
• Pump Body Material: Stainless steel
• Motor Body Material: Cast iron
• Cable Length: 9 m
• Application: Dirty water and sewage removal

<p>The post Total Submersible Sewage Water Pump TWP775016 first appeared on BINJA.</p>

The Atlantic TEMPO LITE Instant Electric Water Heater is a modern and efficient solution for users seeking reliable hot water at a single point of use without the need for storage tanks. Designed and manufactured by Atlantic, a French brand with decades of expertise in water heating solutions, the TEMPO LITE combines compact dimensions, hygienic technology, and user-friendly operation, making it suitable for contemporary residential bathrooms and compact spaces.

• Available power options: 3.5 kW and 5.5 kW

• Electrical supply: 220–240 V, 50 Hz

• Wall-mounted installation

• Compact and slim design suitable for small spaces

• AG+ Silver Ion antibacterial technology for improved water hygiene

• Manual temperature control knob with:

  • OFF position

  • 3 temperature settings

• Power indicator light for operation status

• Supplied showerhead with 5 spray modes

• Instant heating without a water storage tank

• Inlet/outlet connection size: 1/2″

• Dimensions:

  • Height: 371 mm

  • Width: 230 mm

  • Depth: 88 mm

• Net weight:

  • 1.8 kg (3.5 kW model)

  • 1.9 kg (5.5 kW model)

• Designed for residential use

• Brand origin: French brand – Atlantic

<p>The post Atlantic Tempo Lite Instant Electric Water Heater first appeared on BINJA.</p>

The Wilo Medana CH1-L.1004-1/E/E/10T is a high-performance horizontal multistage centrifugal pump engineered to meet the demands of modern water supply and pressure boosting systems. Designed with a compact, close-coupled construction, this pump offers excellent hydraulic efficiency, quiet operation, and long-term reliability in continuous-duty applications. Its robust design and premium materials make it suitable for both technical installations and critical water handling systems where performance and durability are essential.

• Brand: Wilo
• Series: Medana CH1-L
• Model: CH1-L.1004-1/E/E/10T
• Pump Type: Horizontal multistage centrifugal pump
• Design: Close-coupled, compact, monobloc construction
• Standard: EN 733 / EN 12723 compliant design
• Installation: Fixed, horizontal installation
• Rated Flow (Q): Up to 16 m³/h
• Maximum Head (H): Up to 52 m
• Maximum Operating Pressure: 10 bar
• Fluid Temperature Range: –20 °C to +120 °C
• Ambient Temperature: -15 °C to +50 °C

<p>The post Wilo Medana CH1-L.1004-1/E/E/10T first appeared on BINJA.</p>

The SFA Saniplus is a purpose-built full-bathroom macerating pump system designed to expand plumbing possibilities in homes and light residential settings. Whether adding a new bathroom in a basement, loft, garage conversion or secondary suite, the Saniplus offers a flexible above-floor solution to drain wastewater from toilets, wash basins, showers, baths and other fixtures where conventional gravity drainage is impractical

• Brand: SFA Saniflo
• Model: Saniplus
• Origin: Made in France
• Power (P2): 0.5 HP motor
• Discharge: ↑ 15 Ft ↑ and/or ← 150 Ft →
• Suction Size: Two 2″ side inlets for grey water + one 4″ inlet for toilet discharge
• Discharge Size: ¾″ or 1″ outlet with integrated non-return valve

<p>The post SFA Saniplus Full-Bathroom Macerating Pump first appeared on BINJA.</p>

The SFA SANICONDENS CLIM MAXI is a powerful and compact condensate lifting pump designed to meet the drainage needs of modern cooling systems. As air-conditioning units, refrigeration equipment and HVAC systems continue to become more efficient, they often produce larger volumes of condensate. When gravity drainage is not possible, a robust pump is required to lift the water safely to the nearest disposal point. The SANICONDENS CLIM MAXI is engineered specifically for these scenarios, offering high-capacity performance in a discreet, easy-to-install package suitable for residential, commercial and industrial applications.

• Brand:  SFA
• Model: SANICONDENS CLIM MAXI
• Origin: France
• Input Power (P1): Typically 60–100 W range
• Max Head: 10 m vertical lifting capacity
• Max Flow:  8.3 l/min
• Suction Size: Multi-diameter inlet (typically 28 mm or compatible with 20–32 mm AC drain piping)
• Discharge Size: Small-bore discharge pipe (6–10 mm depending on regional model)
• Applications: Wall-mounted AC units, fan-coil units, ducted AC units, VRF/VRV indoor units, refrigeration units, server room cooling equipment, and commercial AC systems.
• Build Material: Durable ABS/PP plastic construction with a high-performance pump module, a transparent inspection window, and an internal float activation system.

<p>The post SFA Sanicondens Clim Maxi first appeared on BINJA.</p>

The Saniflo Sanicondens Best Flat is a compact yet powerful condensate management solution that combines a neutralisation cartridge and condensate pump in a single low-profile unit. Where modern condensing boilers, HVAC systems or refrigeration units produce acidic condensate that cannot reach a drain by gravity, the Best Flat protects pipework, drains and building fabric by raising the pH of the condensate and pumping it safely away.

• Brand: Saniflo (SFA)
• Model: Sanicondens Best Flat
• Origin: Made in France
• 60 W motor power Anchor 
• Max Head: 4.5 m vertical (≈ 15 ft), up to 150 ft (≈ 45 m) horizontal discharge
• Max Flow: 380 l/h (≈ 6.3 l/min, 0.38 m³/h)
• Suction Size: Inlet dimension 28 mm (multi-diameter connector for 25–32 mm pipe; three entry points on tank)
• Discharge Size:  Small-bore 10 mm discharge hose via 32 mm adaptor/outlet kit
• Applications:
  Neutralising and pumping acidic condensate from:
  – Condensing gas boilers up to 80 kW
  – Condensing oil boilers up to 50 kW
• Build Material: Low-profile plastic tank with a built-in neutralisation chamber (neutralising granules), an integrated check valve, a float system, and an alarm connection.

<p>The post Saniflo Sanicondens Best Flat 2-in-1 Condensate Neutraliser & Pump first appeared on BINJA.</p>

The SFA SANIACCESS 4 is a versatile, high-performance grey water pump engineered for domestic and light-commercial applications where drainage cannot be achieved by gravity. Built to support multiple sanitary fixtures—including wash basins, sinks, showers, baths, dishwashers, washing machines and bidets—the unit is ideal for new builds, home renovations and rental properties where reliability and accessibility are essential. The product sheet emphasizes that the SANIACCESS 4 is designed as a low-cost maintenance solution, helping installers and property owners keep systems functioning with minimal disruption.

• Brand: SFA
• Model:
  SANIACCESS 4 / Saniaccess Pump
• Origin: Not specified (SFA Group – France)
• Power (P2): Not specified by manufacturer
• Input Power (P1): 400 W motor power
• Suction Size: 40 mm inlet diameter, 3 entries total
• Discharge Size: 32 mm discharge pipework diameter
• Applications: Wash Basin, Sink, Shower, Bath, Bidet, Washing Machine, Dishwasher, Softened Water, and other grey-water fixtures.
• Build Material:  Durable plastic tank with double access design –
  • Top access to mechanics (blockage clearing)
  • Access to electrics for maintenance & parts replacement

<p>The post SFA SANIACCESS 4 FOR WASH BASIN first appeared on BINJA.</p>

The Sanicompact Pro from SFA is a compact, high-performance macerator toilet created for projects where space is limited but reliability and comfort cannot be compromised. It combines a full-size ceramic bowl with an integrated macerator and discharge pump, eliminating the need for a separate cistern or external macerator unit. This all-in-one design reduces the installation footprint and simplifies both plumbing and electrical work.

• Brand: SFA
• Model: Sanicompact 43
• Origin: France
• Power (P2): 550 W motor power
• Discharge Size: 3 m vertically and 30 m horizontally
• Applications: Replacement for bidet or standard WC, compact cloakrooms, small bathrooms, basement/attic WCs, small commercial washrooms where gravity drainage is not available or is difficult to access
• Build Material: Ceramic WC with regular, comfortable bowl; internal macerator with multi-cutter disc; supplied with standard seat; electrical and hydraulic components rated up to 35 °C wastewater and IP44 protection

<p>The post SFA Sanicompact Pro Compact Macerator Pump first appeared on BINJA.</p>